Videofied VIA-Pro Manual de instalación Pagina 22
- Pagina / 25
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
20
1. With the display showing the current date, time, and
LVL:4, press the left arrow button twice. The display
shows BADGES ACCESS CODES.
2. Press YES. The display shows BADGE OR CODE.
Enter your installer code +
YES. The display shows
RECORDING A BADGE/CODE.
3.
Press YES. The display shows BADGE OR CODE.
4. Enter the desired code + YES. The display shows
CONFIRM THE CODE.
5. Re-enter the code + YES. The display shows
CODE NAME:.
6. Enter the desired name + YES. The display shows
[NAME] ENTRY COMPLETE
, then returns to
RECORDING A BADGE/CODE.
7. Press the right arrow button once. The display shows
BADGES/CODES CONFIGURATION.
8.
Press YES. The display shows MODIF NAME
BADGE CODE.
9. Press the right arrow button once. The display shows
ACCESS LEVEL 3.
10. Press YES. The display now shows a colon (:) between
LEVEL and 3.
11. Press either arrow button until the desired level is
displayed, then press
YES. The display shows the new
level assignment.
12. Press ESC/NO three times to return to BADGES
ACCESS CODES.
13. Repeat steps 2 - 12 for remaining codes.
Changing Access Level Assignments
You can change the access level assignments as needed any-
time, using the following steps.
1. With the display showing the current date, time, and
LVL: 4, press the left arrow button twice. The display
shows BADGES ACCESS CODES.
2. Press YES. The display shows BADGE OR CODE.
Enter your installer code +
YES. The display shows
ENTER A BADGE/CODE.
3. Press the right arrow button once. The display shows
BADGES/CODES CONFIGURATION.
4. Press YES. The display shows the rst programmed
access code.
5.
Press either arrow button until the desired code
appears, then press
YES. The display shows MODIF
NAME BADGE/CODE.
6. Press the right arrow button once. The display shows
ACCESS LEVEL 3.
7. Press YES. The display now shows a colon (:) between
LEVEL and 3.
8.
Press either arrow button until the desired level
assignment appears, then press
YES. The display
shows the new level assignment.
9.
Press ESC/NO.
10. Repeat steps 5 - 9 for other level assignment changes
Changing Access Code Alarm Mode
Restrictions– After programming a new access
code, altering alarm (arming) modes for any access code,
using the following steps.
1. With the display showing date, time and LVL 4, press
the left arrow button twice. The display shows BADGES
ACCESS CODES.
2.
Press YES. The display shows BADGE OR CODE. Enter
a Level 2 or 3 access code +
YES. The display shows
ENTER A BADGE/CODE.
3. Press the right arrow button once. The display shows
BADGES/CODES CONFIGURATION.
4. Press YES. The display shows the rst programmed
access code.
5.
Press either arrow button until the desired code
appears, then press
YES. The display shows MODIFY
NAME BADGE/CODE.
6. Press the left arrow button once. The display shows
ALARM MODES ALLOWED.
7.
Press YES. The display shows SPECIAL MODE 1
ALLOWED.
8.
Press either arrow button until the desired mode
appears, then press
YES. The display shows a colon (:)
next to ALLOWED.
9. Press either arrow button once. The display changes
to DISABLED.
10. Press YES. The display shows the new alarm (arming)
mode setting without the colon.
11.
Repeat steps 5 - 10 for other code restriction changes.
Deleting Access Codes– Delete access codes as
needed anytime, using the following steps.
1. With the display showing the current date, time, and
LVL: 4, press the left arrow button twice. The display
shows BADGES ACCESS CODES.
2.
Press YES. The display shows BADGE OR CODE.
Enter your installer code +
YES. The display shows
ENTER A BADGE/CODE.
3. Press the left arrow button once. The display shows
DELETING BADGES/CODES.
4.
Press YES. The display shows the rst programmed
access code.
5. Press either arrow button until the desired code
appears, then press
YES. The display shows
DELETING CODE.
6.
Press YES again. The display shows CODE DELETED.
7.
Repeat steps 5 - 6 to continue deleting codes.
After Completing Initial Configuration/ProgrammingChanging Settings
© 2020, manymanuals.es. Todos los derechos reservados | 0.031 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales